Catalyst BI | BI, Data Analytics and AI News

Awaab’s Law Phase 2: What a year of Phase 1 should tell you about your data

Written by Peter Chase | Nov 17, 2026, 1:01:24 PM

Phase 1 of Awaab’s Law has been in force since 27th October 2025. For a year, social landlords have been working to fixed legal timescales for emergency hazards and significant damp and mould. On 30th November 2026, Phase 2 applies the same duties to seven more hazard categories, from excess cold to electrical hazards.

Phase 2 doesn’t introduce a new process. Awareness, triage, investigation, written summaries and safety work all stay the same. What changes is the number and variety of cases that run through them.

That makes the questions for Phase 2 different from the ones you faced a year ago. What has your first year of case data shown? Can that data prove compliance to a tenant, the Housing Ombudsman or a court? And once you trust it, what else can it tell you about your homes?

This article works through all three: what Phase 1 has taught the sector, how to evidence compliance under Phase 2, and how to turn Awaab’s Law case data into insight for investment decisions.

Short on time? Book a call with one of our data specialists to talk through what your Phase 1 data is telling you.

What has Phase 1 of Awaab’s Law taught social landlords?

The government’s Awaab’s Law Phase 1 Test and Learn research, published in July 2026, gives the clearest picture so far. Its fieldwork ran between December 2025 and March 2026 and drew on 35 registered providers and 30 tenants.

35
registered providers took part
30
tenants took part
Dec to Mar
fieldwork, December 2025 to March 2026

The findings show a sector that has started, but unevenly:

✓Response varies by hazard. Emergency hazards “were often addressed quickly”, but “damp and mould cases frequently extended over weeks or several months”.
✓Processes are still settling. “Many were continuing to refine triage, escalation and record keeping arrangements.”
✓The clock is hard to pin down. Definitions of when statutory clocks start “were widely described as subjective or insufficiently defined”.
✓Tenant communication has gaps. “Tenants did not consistently receive written inspection summaries.”
✓Systems hold teams back. “Limitations in IT interoperability constrained the pace and consistency of delivery.”
✓Capacity is stretched. Landlords reported “workforce shortages (particularly surveyors and specialist trades), rising contractor costs”.

One finding stands out for anyone responsible for data:

“Early identification of vulnerability was recognised as critical to prioritisation and risk management, but landlords reported that vulnerability data were often incomplete, inconsistently recorded or difficult to operationalise, particularly where health information was not routinely shared or updated or where staff lacked confidence in how to weight different vulnerabilities.”

Nearly every one of these findings is, at heart, a data problem: when the clock started, what was recorded, what the tenant was told and whether the systems could share it. Phase 2 adds more hazard types to the same workflows, so any weakness you’ve lived with for a year will now show up more often.

“Many Housing Associations have grown through mergers, bringing economies of scale and better investment opportunities. A consequence is, however, that data is scattered and needs to be brought together. Only with alignment of data across systems, clear ownership and consistent timestamps, can efficient responses to tenants’ needs be achieved. Awaab’s Law, addressing hazards such as damp and mould, is a prime example where helping tenants and regulatory reporting make this imperative, not optional.”Peter Chase, Account Manager, Catalyst BI

What’s changing under Phase 2 of Awaab’s Law?

From 30th November 2026, the significant hazard requirements extend beyond damp and mould to seven more Housing Health and Safety Rating System (HHSRS) categories, where they present a significant risk of harm:

All emergency hazards (other than overcrowding) and significant damp and mould stay in scope. The Awaab’s Law timescales don’t change:

Stage Deadline
Emergency hazard: investigate and complete safety work Within 24 hours of becoming aware
Significant hazard: investigate Within 10 working days of becoming aware
Written summary to the tenant Within 3 working days of the investigation concluding
Significant hazard: complete relevant safety work Within 5 working days of the investigation concluding
Supplementary preventative work Begin within 5 working days where reasonably practicable, and within 12 weeks at the latest

For the wider picture, read our guide to 2026 UK public sector data trends for housing associations.

What should your Phase 1 data be telling you?

A year of Phase 1 cases is the best test you have of Phase 2 readiness. Before the new hazards arrive, ask your data these questions:

1.When did the clock really start? Compare the date you first became aware with the date a job was raised. The guidance is clear that awareness can start with an employee: if a tenant reports an issue to a maintenance officer, the landlord is aware from that point. Look for cases where the earliest notice sat in a call recording, email, CRM note, contractor app or inspection report.
2.Which deadlines slipped, and at which stage? Break performance down by investigation, written summary, safety work and preventative work, not just case closure.
3.Can you prove every written summary went out? Check how many cases hold the summary itself, the issue date and evidence of delivery.
4.How complete is your vulnerability data? Test whether it was available, current and used at the point of triage.
5.How quickly do contractor updates reach you? Measure the gap between work completed on site and evidence landing in your systems.
6.How are no-access cases handled? Check that every contact attempt is recorded, timed and linked to the case.
7.Which hazards keep coming back? Find properties with repeat reports or several linked cases.
8.What will Phase 2 add? Use Phase 1 volumes and your stock condition data to estimate demand, capacity and contractor pressure for the new hazard types.

If the answers are hard to find, that tells you something too. When details change, your records should keep the previous version rather than overwrite it, so you can always show what you knew and when.

Not sure your systems can answer these questions? Take our Data Management Health Check to find the gaps.

Can you prove compliance once Phase 2 starts?

Meeting a deadline is one thing. Showing that you met it, months later and to someone else, is another. Under Awaab’s Law, three routes can put your records to the test:

✓The courts: Awaab’s Law is implied into social tenancy agreements, so tenants can take action for breach of contract. Courts can order works, compensation and legal costs.
✓The Housing Ombudsman: the Ombudsman adjudicates disputes about Awaab’s Law compliance. It can look at whether time limits were met and whether you followed your own policies, and can find maladministration.
✓The Regulator of Social Housing: the Regulator doesn’t decide individual complaints, but it can act on significant failures under its Safety and Quality standard.

The government guidance also sets out a reasonable endeavours defence. To rely on it, landlords will need to evidence the steps they took, including correspondence with tenants and contractors. That puts your records at the centre of any challenge.

A record that stands up to scrutiny is:

1.Complete: it runs from first awareness through to closure and follow-up.
2.Timestamped: it uses consistent time and working-day rules across every system.
3.Attributable: every action names the employee, team, contractor or system involved.
4.Traceable: every dashboard status links back to its source record and evidence.
5.Version-controlled: changes to triage, risk, deadlines or works stay visible.
6.Accessible: authorised teams can find the full record quickly.
7.Governed: retention, privacy, security and data quality rules apply consistently.

A strong audit trail supports your assurance but doesn’t guarantee a legal outcome, and the guidance is clear that only the courts decide whether a landlord has breached Awaab’s Law. Always check the government’s official guidance and take your own legal advice. See how we support housing providers on our social housing page.

What data does every Awaab’s Law case need?

Every case needs one connected record from first awareness to closure. Agree the exact data model with your legal, compliance, housing, repairs and data teams, aligned to the regulations and current guidance. As a starting point, we group it into four areas.

Data area What to record
Case and awareness A unique case ID linked to the property, tenancy and household. The exact date and time you first became aware. Who raised or observed the issue, through which channel and in which system. The original description, photos, recordings or documents. Any material change and when it became known. The responsible team, case owner and escalation status.
Tenant, household and vulnerability Household members affected and their circumstances. Known vulnerabilities that may change the severity or urgency of the risk. Communication preferences, accessibility requirements and support needs. Consent, source, review date and access controls for sensitive information.
Triage and investigation Hazard type, potential severity and whether you treated it as significant or emergency. The reasoning, evidence and guidance behind the triage decision. Investigation type, appointment, attendance and conclusion timestamps. Inspector or contractor, relevant competencies, findings and evidence. Any further investigation and how it links to the original case.
Action, communication and resolution Safety actions, supplementary preventative work and target dates. Actual start and completion times, status changes and reasons for delay. Written summary content, issue date, channel and proof of delivery. Tenant updates, safety advice and responses. Access requests, appointments, failed visits and every attempt to engage. Contractor instructions, acknowledgements, visits and handovers. Alternative accommodation considered, offered, accepted or declined. Completion evidence, tenant confirmation, follow-up and recurrence.

There’s now a shared starting point too. The Awaab’s Law data standard, from MHCLG and HACT, sets out four core entities for hazard case data.

Vulnerability data needs particular care. It must be accurate, current and proportionate, and available to the people making triage decisions, with the right privacy and security controls. Our data governance specialists can help you get that balance right.

Where do fragmented systems put compliance at risk?

Compliance gaps can open up where housing, repairs, assets, contractors and customer services keep separate records:

✓Conflicting dates: systems hold different awareness dates or case statuses.
✓Late contractor updates: work is done on site but the evidence arrives days later.
✓Stale vulnerability data: triage happens without information that should raise the priority.
✓Disconnected contact history: emails, call notes and access attempts never reach the case.
✓Manual written summaries: there’s no reliable proof of when, or whether, letters went out.
✓Broken clocks: deadlines pause or reset wrongly during handovers or no-access cases.
✓Hidden recurrence: you can report completed jobs but not repeat hazards.

You don’t need to replace every system to fix this. You need to understand how your data flows, where it breaks and how to integrate what matters.

To see where this happens in practice, follow one hazard case through six systems in our Awaab’s Law evidence trail.

Book a Data Strategy Workshop and we’ll help you close the gaps before Phase 2 adds to them.

How can Awaab’s Law data guide investment, not just compliance?

Once your case data is connected and trusted, it does two jobs.

The first is live case management. BI gives you an assurance layer across every system that touches a case, so teams can step in before a deadline is missed rather than report on it afterwards. Useful measures include:

✓Cases approaching or exceeding each statutory deadline.
✓Time from awareness to triage, investigation, written summary, safety work and completion.
✓Open cases by hazard, severity, area, contractor and team.
✓Cases involving vulnerabilities or extra communication needs.
✓No-access cases and every contact attempt.
✓Missing fields, inconsistent timestamps and absent evidence.

Onward Homes already works this way. See how it gave 1,200+ staff live service data and alerted teams before cases breached.

The second is insight. The same data, joined with your stock condition and asset records, can show where hazards keep returning, which property types and areas generate the most cases, and which contractors resolve issues first time. That helps you move spend from reactive repairs towards planned work that stops hazards recurring, and gives your board evidence for those decisions.

It also prepares you for what comes next. The government guidance says a later phase will extend Awaab’s Law to all remaining HHSRS hazards apart from overcrowding, though it doesn’t give a date. A data foundation built properly for Phase 2 won’t need rebuilding for that.

Our data analytics services help housing providers build exactly this kind of reporting.

Is your data ready for the next phase of Awaab’s Law?

After a year of Phase 1, the question isn’t whether you have a process. It’s whether your data shows that the process works. From 30th November 2026, seven more hazard categories run on the same statutory deadlines, and every case will need a clear record of when you became aware, what you knew, what you decided and what you told the tenant.

Use your Phase 1 data to find the gaps now, build records that can prove compliance, and put the same data to work on investment decisions. We help social landlords assess their data maturity, connect fragmented information and build decision-ready reporting.

FAQs

What is Awaab’s Law?
Awaab’s Law requires social landlords in England to investigate and fix hazards that could seriously affect tenants’ health or safety within fixed legal timescales. It was introduced after two-year-old Awaab Ishak died in 2020 from prolonged exposure to mould in his family’s home. Phase 1 began on 27th October 2025, and Phase 2 follows on 30th November 2026.
When does Awaab’s Law Phase 2 come into force?
Phase 2 comes into force for social landlords in England on 30th November 2026, adding seven more hazard categories to the same statutory deadlines.
What did the Awaab’s Law Phase 1 research find?
The government’s Test and Learn research, published in July 2026, found landlords were often quick to address emergency hazards, but damp and mould cases frequently took weeks or months. Many were still refining triage, escalation and record keeping, and IT interoperability limited delivery.
Does Awaab’s Law apply to social housing landlords?
Yes. It applies to registered providers of social housing in England, including local authorities and housing associations. It covers almost all social housing let under a tenancy, but generally not owner-occupied homes, shared ownership or accommodation occupied under a licence.
What records do landlords need to keep for Awaab’s Law?
You need accurate records of awareness, tenant and property context, triage decisions, investigations, works, access attempts, contractor activity, written summaries and tenant communication. Align your record keeping with the regulations, official guidance and your own legal advice.
Can BI help with Awaab’s Law compliance?
Yes, but no software can guarantee compliance on its own. BI connects information across systems, highlights missing evidence, monitors deadlines and supports assurance. Compliance still depends on your processes, people and legal oversight. We work with leading technology partners and provide the professional services to get your data ready.